We offer a wide range of sizes and shapes in our product label stickers that complement the bags, pouches and boxes we offer.

ROUND & SQUARE

• 25mm x 25mm
• 40mm x 40mm
• 50mm x 50mm
• 75mm x 75mm
• 100mm x 100mm

 OVAL & RECTANGLE

• 25mm x 50mm
• 25mm x 75mm
• 40mm x 60mm
• 50mm x 75mm
• 50mm x 100mm
• 50mm x 125mm
• 75mm x 125mm
• 75mm x 155mm
• 100mm x 125mm
• 100mm x 155mm

Our Coffee Bag and Die Cut Labels fit within the above-listed sizes. Check out those product pages for more details.

No. We use roll materials, so there is nothing predetermined, meaning that you can use the Label Sizes & Shapes as a guideline to design within, but it’s also ok if it’s not exact.

In other words, we'll print and cut your label or stickers as a standard Round, Square, Oval or Rectangle design, if that’s what you want and how you have set up your design, but if your design has some intentional irregular shape to it, well cut it to that shape, no problems!

For example, your label might be a rectangle shape, but the top of your design has rounded edges and looks like a dome, that's fine, we'll cut it to that shape so long as your CUT layer is set up to cut out those edges; otherwise, we'll just print it and cut it as a rectangle.

Some may call this a Die Cut Label... and yes, we can do it, it's one of the options you can choose.

When it comes to label and sticker printing, we print on a quality range of materials, types and finishes to make sure we can bring your brand to life.

 STANDARD / PAPER

• Matte White
• Gloss White
• Wine Label White

With no plastic coating on these materials, they aren't 100% waterproof, but they are easy to write on, won't smudge, and have the added bonus of being kerbside recyclable.

PREMIUM / PET

• Matte White
• Gloss White
• Clear
• Matte Silver
• Gloss Silver

The plastic coating on these materials makes them more durable and water resistant, though they have a higher shine than the paper option, meaning that they are not as easy to write on and prone to smudging.

The clear and silver materials really do look ahh-mazing with some white highlights in the design!

As a comparison, the label material thickness is just like your standard A4 paper.

For those who like to geek out on the details with us, our Labels & Stickers materials GSM is as follows:

PAPER - 80GSM

PET - 75GSM - 80GSM

Our label printing service is really quite simple. We take your perfectly created print ready artwork file and drop that into a configurator that sets up the label or sticker for the most productive and efficient print solution.

We'll then check off the print layer and confirm the cut layer is right, too, and then hit print!

Your chosen material then passes through the digital roll printer before moving onto the cutter to create your label or sticker shape.

From here, we'll roll that up once it's finished cutting and ship it off to you.

Setting up your print ready artwork isn't meant to be hard, but we do know that it can raise a few questions along the way, and there are definitely a few things we need you to do so we can create your label or sticker the way you imagine it to look.

FILE TYPE

The ideal file type is Adobe Illustrator (AI) or PDF, either way, you’ll need to make sure it has a separate PRINT & CUT layer.

The PRINT layer needs to extend by 2mm around your design into what's known as a bleed. That will make sure we don't cut off any important details in your design.

The CUT layer should be RED and set up to correspond with the exact, finished size or shape of your design.

So that means we need a print-ready file with 2 layers, PRINT & CUT!

Please do not include any crop or registration marks, and please provide a seperate file per design rather than a multi-page document.

Your designer will be able to assist you in setting these requirements.

ARTWORK

Make sure that you design with all your important details or elements at 1.5mm inside the CUT line so we don't accidentally cut anything off.

We recommend that the thickness of your lines, strokes and gaps should be no less 0.2mm.

Ideally, your design is created in a vector format, and if you're using an image, then it too, should be in CMYK and no less than 300DPI.

FONTS

Using a font size of 6PT or above as a minimum is important. We do want your text to be legible! We also require all fonts to be converted to outlines to avoid any problems when it comes to printing.

BLEED AREA

Please always allow for a 2mm bleed all around your design.

COLOUR

All our labels and stickers are printed digitally using CMYK+W so all the colours in your file should be converted to CMYK and not RGB or HEX.

Our labels are suitable for any number of purposes including food packaging.

We have applied our labels to coffee bags, tea leaves, protein powders and pet food.

There's obvious limitations to the lifespan and performance of the labels, if the paper labels get wet, they're going to get soggy and tear more easily, where as PET ones will last longer in the same conditions.

Similar logic applies to labels that will be exposed to extreme or long period of light and sun exposure.

We don't recommend attaching you labels directly onto your product without any packaging, it's certainly not going to taste any good!.

We have set up our printing quantities from an MOQ of 50 units, but if you want less that that, let us know through the enquiry form and we'll organise something that works for you.

With the support of Imprint Rubber Stamps we have created a range of stamps that closely compliment the sizes and shapes of our labels, that makes sense!

ROUND & SQUARE

• 30mm x 30mm
• 40mm x 40mm
• 50mm x 50mm
• 80mm x 80mm
• 100mm x 100mm

 OVAL & RECTANGLE

• 30mm x 50mm
• 30mm x 75mm
• 40mm x 60mm
• 50mm x 80mm
• 50mm x 100mm
• 50mm x 125mm
• 80mm x 125mm
• 80mm x 155mm
• 100mm x 125mm
• 100mm x 155mm

If these sizes don't work for you, let us know and we'll get you into a size that works for you, just complete the enquiry form.

No. Use the stamp sizes as a template guideline that your design will sit inside of.

The stamps are created using a using an incredibly accurate laser cutter that literally etches your design into the rubber, creating a super detailed finish.

Our rubber stamps are crafted and supplied in partnership with Imprint Rubber Stamps.

The production process of crafting a stamp uses a number of raw materials including latex rubber, wood for the mounting blocks and adhesive backed padding that is placed between the rubber and the block to hold it all together.

It's a simple, yet traditional process that delivers a long lasting impression.

Setting up your artwork isn't meant to be hard, but we do know that it can raise a few questions along the way, and there are definitely a few things we need you to do so we can create your stamp.

FILE TYPE

We can use a number of file types to create your stamp as listed below;

• Adobe Illustrator (AI)
• PDF
• JPEG
• EPS

Not matter what file type you use, the artwork must be saved a at minimum 600dpi.

The production process uses precision laser etching to craft your stamp and requires the highest possible detail in your artwork file to deliver that.

If you're not confident in creating that yourself, we'd suggest engaging a designer to assist you in setting up your artwork, that way you'll know your going to get the best possible outcome.

ARTWORK

Highly detailed artwork is the critical element in delivering the best outcome.

The artwork must be supplied in BLACK + WHITE Essentially that's what your finished stamp will look like.

That artwork needs to be saved at a minimum 600dpi.

COLOUR

Your stamp is dry when it's delivered to you, meaning that the colour output of your stamp will come from whatever ink you decide to use, and the choices are literally endless.

We use your 600dpi artwork file which is loaded into a computerised template.

That template is passed onto the laser stamp print driver. Next, it's previewed for quality and alignment, then it's sent off to production where it's etched onto a rubber sheet.

The laser cuts your design out of the sheet of rubber, replicating your artwork.

And the result?

Well, that's your amazing rubber stamp design which is ready to be cut from the sheet of rubber and be made into a custom stamp. Easy.

The MOQ is as low as we can go. 1 unit, but we're happy to make as many as you want!

Generally we'll have the stamp out to you within a week, but some of that depends on you too, and generally that's whether your artwork is ready or needs work.

Whatever the case we're here to work with you and get your stamp out to as quickly as possible.